摘要: |
为解决奥利康锥齿轮加工过程中需要反复试切、修正的问题,根据奥利康SKM2机床建立了加工延伸外摆线齿锥齿轮和准双曲面齿轮的齿面接触分析模型,提出了一种可预测齿面接触质量、降低设计加工成本的新方法。利用研制成的“齿面接触分析”软件对一实例进行计算,计算机输出的图形与切齿实验得到的接触区基本相同。本软件不仅可用于切齿调整的计算机辅助分析,而且可用于齿面接触区移动规律的计算机辅助分析。 |
关键词: 摆线齿 锥齿轮和准双曲面齿轮 齿面接触区 计算机辅助分析 |
DOI:10.11841/j.issn.1007-4333.2004.05.128 |
修订日期:2004-05-19 |
基金项目: |
|
Computer aided analysis for contact pattern of prolate epicycloid bevel and hypoid gears |
|
|
Abstract: |
In order to solve the problems of which the spiral bevel gear of Oerlikon type is necessary to cut and modify repeatedly, a new method was developed to predict the contact pattern and greatly reduce the cost for manufacturing by means of building a tooth contact analysis model of prolate epicycloids bevel and hypoid gears for Oerlikon SKM2. Running through the developed calculation software package, the diagram output by computer softwares closely coincides with the contact pattern observed on a testing machine. The package is not only used for computer aided analysis tooth contact pattern, but also for analyzing the moving rule of tooth contact pattern. |
Key words: prolate epicycloid,bevel and hypoid gesrs,contact pattern,computer aided analysis |